Anritsu MG3690C - RF/Microwave Signal Generator

• Broadband signal generator
• Covers audio, HF,  VHF, UHF, RF, and microwave frequencies from 0.1 Hz to 70 GHz in single coaxial output and up to 500 GHz or beyond, with external multipliers
• Offers three levels of SSB phase noise performance;  Standard, Ultra-low phase noise (option 3), and Premium phase noise (option 3X)
• Has also an optional full suite of modulation capabilities including AM, FM, Phase, and Pulse to address simple to complex signal simulation requirements
  GPIB or Ethernet connectivity

Anritsu MG3710A - Vector Signal Generator

• Vector Signal Generator supporting frequencies of 100 kHz to 6 GHz
• ACLR: -71 dBc (W-CDMA, Test-Model 1, 64DPCH, ≤+5 dBm)
• Output level +23 dBm (CW, 400 MHz to 3 GHz)
• Switching time: <600 µs (List/Sweep mode)
• Built-in wideband (160 MHz/120 MHz) baseband signal generator
• Dual RF  provides two independent RF outputs
• Dual Waveform Memory  enables two independently modulated signals  per RF Output
• Generate and output modulation signals of various communication systems such as 5G NR (sub-6 GHz), LTE-Advanced FDD / TDD

Agilent N9310A - RF Signal Generator

• RF Signal Generator
• 9 kHz to 3 GHz CW output, 20 Hz to 80 kHz low frequency (LF) output
• 127 to +13 dBm output level range (maximum +20 dBm settable)
• -95 dBc/Hz SSB phase noise
• Extensive analog modulation: AM, FM, Phase, and Pulse modulation
• IQ modulator, 40 MHz bandwidth
• Intuitive GUI offering 11 languages
• Standard USB connectivity for test automation and memory stick support
• SCPI command set for remote control

HP 83650L - Synthesized Swept-CW Generator

• 10 MHz to 50 GHz
• Synthesized Swept-CW Generator
• +2.5 dBm calibrated output power
• -50 dBc harmonics <26.5 GHz typical
• SSB phase noise <-80 dBc at 10 GHz and 10 kHz offset
• Complete analog sweeper
• -110 dBm output power with step attenuator

Chroma 2326 - Programmable Video Pattern Generator

• Programmable, microprocessor-based instrument for testing high-resolution CRT or monitor
• Analog video pixel rate up to 250 MHz
• Supports DFP interface standards up to 165 MHz
• Large graphic display size up to 4096x2048
• DVI output
• Pixel Rate Range : 25-165MHz (TMDS) 3.126-250MHz (Analog)
• RS-232C interface
• 16-bit TTL output ports for external

Rohde & Schwarz AMU200A - Baseband Signal Generator and Fading Simulator

• K268 - Digital Standard TETRA Release 2
• K284 - LTE Release 9 + Enhanced Features
• K285 - LTE Release 10 / LTE-Advanced
• K286 - IEEE 802.11ac
• K240 - Digital Standard GSM/EDGE
• K246 - Digital Standard CDMA2000® incl. 1xEV-DV
• K247 - Digital Standard 1xEV-DO Rev. A

Rohde & Schwarz SMA100 - Signal Generator

• Frequency Range: 9 kHz to 6 GHz
• Type of modulation: AM, FM, fM, pulse modulation, CW signals
• The low-jitter clock synthesizer option supplies differential clock signals of up to 1.5 GHz independently of the RF frequency

Rohde & Schwarz SMP02 - Microwave Signal Generator

• Microwave Signal Generator
• 10 MHz to 20 GHz
• High output level - >+11.5 dBm
• High spectral purity -109 dBc (1 Hz) at f = 10 GHz and 10 kHz offset
• Pulse modulation pulse width down to 20 ns
• FM/AM/SCAN, FSK, ASK and φM
• Different modulations can also be combined to create more realistic signals

Rohde & Schwarz SMT03 - Signal Generator

• Frequency Range: 5 kHz to 3 GHz
• Frequency Resolution: 0.1 Hz
• Frequency Switching Time: 25 ms
• Time base stability: 0.000001 /yr
• Output Power: -144 dBm to +16 dBm
• Power Resolution: 0.1 dB
• Output Accuracy: 1.5 dB
• Output Impedance: 50 Ohm
• Minimum Single-Side-Band Noise: -120 dBc/Hz
• Maximum Single-Side-Band Noise: -109 dBc/Hz
• Harmonics (noise): -30 dBc
• Non-harmonics (noise): -74 dBc
• Modulation AM,FM,Phase,Pulse
• External Modulation Inputs(Types) Yes
• Sweep Modes: Auto, External, Linear, Log, Manual

Rohde & Schwarz AMIQ I/Q Modulation Generator

• 100 MHz clock rate per channel
• Up to 16000000 samples per channel
• Generation of broadband digital communication signals (e.g. WCDMA, HIPERLAN2, and IEEE802.11a)
• Built-in hard disk for storage of calculated signals
• Antialiasing filter featuring excellent frequency response and group delay
• Auto-alignment and additional user correction of amplitude and offset
• Fine adjustment of I/Q skew
• Wide dynamic range through the use of 14-bit D/A converter, ideal for multicarrier applications
• Excellent ACP (adjacent-channel power) values with WCDMA 3GPP FDD signals of typically –78 dBc for test model 1 with 64 channels

Rohde & Schwarz AFQ100A I/Q Modulation Generator

• Variable memory clock rate (1 kHz to 300 MHz) can optimally be adjusted to the useful signal
• RF bandwidth of 200 MHz
• Long signal duration of up to 1 Gsample
• Excellent spurious-free dynamic range (SFDR) of typ. 83 dBc
• R&S®WinIQSIM2™ options for communications standards such as LTE, WCDMA, HSPA, HSPA+, GSM/EDGE, EDGE Evolution, VAMOS, CDMA2000, 1xEV-DO, WLAN, WiMAX, Bluetooth

Rohde & Schwarz AFQ100B UWB Signal and I/Q Modulation Generator

• Memory clock rate:

• Standard mode (mode 1): Variable clock rate (1 kHz to 300 MHz)
• Broadband mode (mode 2): 600 MHz

• 200 MHz RF bandwidth in standard mode
• 528 MHz RF bandwidth in broadband mod
• Long signal duration of up to 1 Gsample
• Excellent spurious-free dynamic range (SFDR) of typ. 78 dBc
• Digital standards like WCDMA, LTE, HSPA, WLAN802.11a/b/g/n/ac, MB-OFDM UWB ... using WinIQSIM2
• LXI Class C conformant

Keysight N5173B EXG X-Series

• Microwave Analog Signal Generator, 9 kHz to 40 GHz
• Maximize test throughput with 600-µs frequency switching
• Characterize microwave filters & amplifiers with the best combination  of output power, low harmonics & full step attenuation
• Use as a high-stability system reference: the standard  high-performance OCXO has an aging rate of 5x10-10 parts/da